Mail Us at : sales@kitomaindonesia.com | Call Us 021 2851 8059

Frenic Lift Fuji Electric 3-phase 400V

 

 

Kitoma Indonesia - Frenic Lift Fuji Electric 3-phase 400V

 

Elevator Inverter Frenic-Lift
 

Frenic Lift 3-phase 400V models

  • FRN4.0LM1S-4EA   : 3.7kW
  • FRN5.5LM1S-4EA   : 5.5kW
  • FRN7.5LM1S-4EA   : 7.5kW
  • FRN11LM1S-4EA    : 11kW
  • FRN15LM1S-4EA    : 15kW
  • FRN18.5LM1S-4EA : 18.5kW
  • FRN22LM1S-4EA    : 22kW
  • FRN30LM1S-4EA    : 30kW
  • FRN37LM1S-4EA    : 37kW
  • FRN45LM1S-4EA    : 45kW

 

Optimum Exclusive Design for Passenger Elevators

  • A braking circuit is built in the inverters of all the capacities
  • Built-in PG feedback circuit is standard equipment.
  • An optional keypad is available


Higher Performance

  • Overload capacity : 200% for 10s
  • Current response : 5 times greater than previous models (corporated with the G11UD series
  • Reduction of torque ripple realizes low vibration
  • Reduced roll-back during starting up


High performance vector control

  • Current response (ACR) : 500Hz
  • Speed control accuracy : ±0.01%


High overload capacity
200% of rated current for 10s (overload begins from 80% continous operation with a carrier frequency of 10kHz).

 

Specifications


Models
Specifications
Type FRN***LM1S-4EA (*9)
4.0 5.5 7.5 11 15 18.5 22 30 37 45
Nominal applied motor [kW] (*1) 3.7 5.5 7.5
11
 15 18.5
22
30 37 45
Output ratings Rated capacity [kVA] (*2) 6.8 10.2 14 18 24 28 34 45 57 69
Rated voltage [V] (*3) Three-phase, 380 to 480V, 50/60Hz 3-phase, 380 to 460V, 50/60Hz
Rated current [A] (*4)     37.0 49.0 63.0 74.0 90.0      
Overload current rating [A] (10s) 18.0 (3s) 27.0 37.0 49.0 64.0 78.0 90.0
108 (5s) 135 (5s) 163 (5s)
Rated frequency [Hz] 50, 60Hz
Input rating Nominal operation Main power supply Phases,
Voltage, Frequency
Three-phase, 380 to 480V, 50/60Hz
Auxiliary control power input
Phases, Voltage, Frequency
Single-phase, 200 to 480, 50/60Hz Single-phase, 380 to 460V, 50/60Hz
Permissible voltage and frequency fluctuation (*8) Voltage: +10 to -15% (voltage imbalance within 2% or less *5), frequency: +5 to -5%
Rated input current [A] (*s) With DCR 7.5 10.6 14.4 21.1 28.8 35.5 42.2 57.0
68.5
83.2
Without DCR 13.0 17.3 23.2 33.0 43.8 52.3 60.6 77.9 94.3 114
Required power supply capacity [kVA] (*6) 5.2 7.4
10 15 20
25
30 40 48
58
Battery Operation Main power supply 48VDC or more in the direct current voltage conversion
Auxillary
Control power
input (*10) 
Phases, Voltage, Frequency Single-phase, 200 to 480V, 50/60Hz Single-phase, 380 to 460V, 50/60Hz *10
Permissible Voltage and Frequency Fluctuations Voltage: +10 to -15%, Frequency: +5 to -5%
Braking Braking time [s] (*12) 60
Braking duty-cycle (%ED) [%] (*12) 50
Minimum resistance which can be connected [Ω] (*8) 96 64
48 24 24 16 16 10 10 8
DC Reactore (DCR) Option
Applicable safety standard EN50178: 1997, EN954-1 EN61800-5-1, EN954-1 Category3
Enclosure (IEC60529) IP20
Cooling method Fan cooling
Weight/Mass [kg] 3.0 5.6 5.7 7.5 11.1 11.2 11.7 24 33 34

(*1)     Fuji Electric's 4-pole standard motor is used as an example of a applicable motor rating.
(*2)     The rated capacity shows the case where the output voltage is 220V.
(*3)     Voltages exceeding the power supply voltage cannot be output.
(*4)     The rated current shows the case where the carrier frequency is 10kHz, ambient temperature is 45℃ or under, and the root mean squared current in cycle operation is 80% of the AC Drive's rated current. (or 16kHz at 40% ED)
(*5)     Voltage imbalance [%] = (Max. voltage [V] - Min. voltage [V] / 3-phase average voltage [V] × 67 (See IEC61800-3).
(*6)     Calculations were made based on a power supply capacity of 500 kVA (if the inverter capacity exceeds 50 kVA, the power supply capacity is 10 times the AC Drive capacity) and a connected power supply %X = 5%.
(*7)     The AC Drive is equipped with a DC reactor (OCR).
(*8)     These permissible fluctuations are tor the main power and the auxiliary control power input.

 

 

Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :

 

Hubungi : Sales & Marketing
Alamat

: Simprug Plaza

 

  Jl. Simprug Raya Blok B.2 No.5 Cikarang Baru Jababeka II - Bekasi 17530

Telepon
: 021 2851 8058  |  021 2851 8059  |  021 3725 0521  |  021 4448 9918
Mobile : 0821 2570 0690  |  0858 9027 2127  |  0877 8228 6338
Fax : 021 2851 8058
Email : sales@kitomaindonesia.com  |  emma@kitomaindonesia.com  |  kitoma_kitoma@yahoo.co.id