Mail Us at : sales@kitomaindonesia.com | Call Us 021 2851 8059

Autonic Humidity Transducer THD Series

 

 

Kitoma Indonesia - Autonic Humidity Transducer THD Series

 

Indoor, Duct & Wall mounting type Temperature/Humidity transducer

Temperature/Humidity transducer THD series is high sensitivity temp./humidity sensor with compact size that supports various outputs and communication function for user’s convenience. The series realizes the optimal temp./humidity control connecting with Autonics temperature controllers and panel meters. Also, the series allows more diverse user’s selection by providing indoor type (THD-R series), duct mount type (THD-D series) and wall mount type (THD-W) as its working environment.
 

 

Autonic THD Series

  • THD-R-PT
  • THD-R-PT/C
  • THD-R-C
  • THD-R-V
  • THD-R-T
  • THD-D
  • THD-W
  • THD-DD
  • THD-WD


Features

  • Compact Design
  • Built-in temp./humidity sensor
  • 7 Segment LED Display (THD-DD/THD-WD)
  • Various output modes DC4-20mA, 1-5 VDC, RS485 (Modbus RTU)
  • Wide range of temp./humidity measurement -19.9 to 60.0℃ / 0.0 to 99.9%RH
  • Communication speed: 115200bps

 

Specification

 

Model THD-R-PT THD-R-PT/C THD-R-C
THD-R-V
THD-R-T
THD-D□-□
THD-W□-□
THD-DD□-□
THD-WD□-□
Display type - Non-indicating type 7Segment LED display
Display digit - - Each 3digits for
temp./ humidity
Character size - - W6.2×H10.0mm
Power supply - 24VDC
Allowable voltage range 90 to 110% of rated voltage
Power consumption - Max. 2.4W
Measuring input Temperature
(Built-in sensor)
Temperature, Humidity(Built-in sensor)
Output※1 Temp. DPt100Ω resistance value DC4-20mA, 1-5VDC,
RS485 communication output(Modbus RTU)
Humidity - DC4-20㎃
Measurement
range
Temp. -19.9 to 60.0℃
Humidity - 0.0 to 99.9%RH(THD-R is required to attend for using over 90%RH.)
Accuracy Temp. Max. ±0.8℃ -19.9 to 5.0℃ : Max. ±1.0℃, 5.0 to 40.0℃ : Max. ±0.5℃,
40.0 to 60.0℃ : Max. ±1.0℃ rdg ±1digit(At below -10ºC, within 1.5℃)
Humidity - Max. ±3%RH at 30 to 70%RH
(at 25 to 45℃)
Sampling cycle - Fixed in 0.5 sec.
Insulation resistance - Min. 100MΩ(at 500VDC megger)
Dielectric strength - 500VAC 50/60Hz for 1 minute
Noise strength - ±0.3kV the square wave noise(pulse width:1㎲) by the noise simulator
Vibration Mechanical - 0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 1hour
Malfunction - 0.5mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10min.
Shock Mechanical - 300m/s²(approx. 30G) in each of X, Y, Z directions for3 times
Malfunction - 100m/s²(approx. 10G) in each of X, Y, Z directions for 3 times
Protection IP10 IP65(Except sensing part)
Ambient temperature -20 to 60℃, storage : -20 to 60℃
Cable Terminal type 4-wire, ø4, Length: 2m
Approval CE
Unit weight Approx. 55g Approx. 160g

 

 

 

Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :

 

Hubungi : Sales & Marketing
Alamat

: Simprug Plaza

 

  Jl. Simprug Raya Blok B.2 No.5 Cikarang Baru Jababeka II - Bekasi 17530

Telepon
: 021 2851 8058  |  021 2851 8059  |  021 3725 0521  |  021 4448 9918
Mobile : 0821 2570 0690  |  0858 9027 2127  |  0877 8228 6338
Fax : 021 2851 8058
Email : sales@kitomaindonesia.com  |  emma@kitomaindonesia.com  |  kitoma_kitoma@yahoo.co.id