Mail Us at : sales@kitomaindonesia.com | Call Us 021 2851 8059

Loadcell Interface Unipulse F158

 

 

Kitoma Indonesia - Menyediakan Loadcell Interface Unipulse F158 untuk PLC OMRON SYSMAC α

Since inter-equipment wiring is not required, weighing system construction time can be reduced with serviceability improved.

F158 is a weighing controller that allows direct connection to the base module of OMRON’s general-purpose sequencer SYSMAC α. Since inter-equipment wiring is not required, weighing system construction time can be reduced with serviceability improved. With the power supply shared, drastic cost reductions can be achieved.

 

Specifications Unipulse F158

 

GENERAL SPECIFICATIONS
Power consumption Approx. 400mA when 4 loadcells at 350Ω are connected (with a setting remote console unit connected)
Operating conditions Temperature: Working temperature range 0 - +40°C; Storage temperature range -20 - +75°C
Humidity: 10 - 85% RH (non-condensing)
External dimensions 34.5 (W) x 130 (H) x 101 (D) [mm] (protruding parts not included)
Weight Approx. 330 g

 

ANALOG SECTION
Terminal block input [+EXC, +S, -S, -EXC, +SIG, -SIG] 6-wire type (Ratiometric method)
Excitation voltage 5V DC ±5%, Output current; within 60mA, Ratiometric method (Up to 4 loadcells at 350Ω are parallel-connectable.)
Input range 0.0 - 2.2mV/V
Zero adjustment range [Initial dead load] 0 - 2mV/V
Gain adjustment range 0.3 - 2.0mV/V
Min. input sensitivity 0.15μV / count
Accuracy Non-linearity: within 0.01% FS
Zero drift: within 0.25μV/°C RTI
Gain drift: within 15 ppm/°C
Analog filter Bessel low-pass filter (-12dB/oct.), Cutoff frequency; 2 Hz
A/D converter Speed: 100 times/sec
Resolution: 16 bit
Min. display resolution 1/10000

 

DISPLAY SECTION
Display unit Front panel LED
  • RUN:
  • Lights when the unit is initialized.
  •  
  • CAL:
  • Lights when a calibration error occurs and flashes when it is being calibrated.
  •  
  • OVR:
  • Lights when the weight alarm status is ON.
  •  
  • CMD:
  • Lights when a setting error occurs.

 

PRODUCT CATALOGUE

Button-download.png

 

 

Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :

 

Hubungi : Sales & Marketing
Alamat

: Simprug Plaza

 

  Jl. Simprug Raya Blok B.2 No.5 Cikarang Baru Jababeka II - Bekasi 17530

Telepon
: 021 2851 8058  |  021 2851 8059  |  021 3725 0521  |  021 4448 9918
Mobile : 0821 2570 0690  |  0858 9027 2127  |  0877 8228 6338
Fax : 021 2851 8058
Email : rossa@kitomaindonesia.com  |  sales@kitomaindonesia.com  |  kitomascale@gmail.com