Kinco Servo JD630-LA-000, JD630-AA-000
Kitoma Indonesia : Kinco Servo JD630-LA-000, JD630-AA-000
JD630-LA-000 : RS232, RS485
JD630-AA-000 : RS232, RS485, CANopen
Main Supply Voltage : 3-phase AC380V ± 15% 47~63Hz
Control circuit voltage : 18VDC~30VDC 1A
Rated Current (RMS) : 10A
Peak Current (EPAK) : 35A
Brake Choper threshold : DC680V ± 5V
Over-voltage alarming threshold : DC700V ± 5V
Under voltage alarming threshold : DC400V ± 5V
- CANOpen communication
- STO (Safe Torque Off)
- Strong anti-interface ability
- Isolation protection on communication port
- Main Supply Voltage : AC380V ±15% 50~60Hz
| Main supply voltage | 3-phase AC220V-20/+15% 47~63Hz |
| Control circuit voltage | 18VDC~30VDC 1A |
| Rated current(RMS) | 10A |
| Peak current(PEAK) | 35A |
| Brake chopper threshold | DC680V±5V |
| Over-voltage alarming threshold | DC700V±5V |
| Under-voltage alarming threshold | DC400V±5V |
| Cooling method | Forced air cooling |
| Weight(Kg) | 3.62 |
| Size(width*hight*thicker) | 255×230×77 mm |
| Digital operation panel | 4 buttons and 4 LED display |
| External I/O | 7 digital outputs(OUT1, OUT2, OUT7 are 0.1A and OUT3~OUT6 are 0.5A, can define driver ready and other functions freely; 8 digital inputs(12.5~30V), can define driver enables and other functions freely |
| Analog input | 2 analog inputs, can be used to control speed and torque, the input range is -10V~10V |
| Encoder signal output function | Output encoder signal and master encoder signal are optional, can be used in the multiple axises synchronization, the max. output frequency is 2MHz. |
| Master encoder input function | Can receive 3.3V~4.4V pulse/direction signal, CW/CCW signal, and the RS422 difference signal, the max. input frequency is 4MHz |
| Feedback signal | Incremental A. B. Z. U. V. W. A/. B/. Z/. U/. V/. W/. signal |
| RS232 | The max. baudrate is 115.2KHz, use JD-PC software to communicate with PC, or via free protocol to communicate with controller. |
| RS485 | The max. baudrate is 115.2KHz, use Modbus RTU protocol to communicate with controller. |
| CAN BUS | The max. baudrate is 1MHz, use CANopen protocol to communicate with controller. |
| STO function | STO port can be connected to safe controller, switch, and sensor to protect the system |
| Operating temperature | 0~40℃ |
| Storage temperature | -10℃~70℃ |
| Humidity(non-condensing) | Below 90%RH |
| Protection class | IP20 |
| Installation environment | Installed in a dust-free,dry and lockable environment(such as in a electrical cabinet) |
| Installation mode | Vertical installation |
| Height | No power limitation below 1000m |
| Atmospheric pressure | 86kpa~106kpa |
Mechanical Dimension Diagram
Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :
| Hubungi | : Sales & Marketing |
| Alamat |
: Simprug Plaza |
|
Jl. Simprug Raya Blok B.2 No.5 Cikarang Baru Jababeka II - Bekasi 17530 Jawa Barat - Indonesia |
|
| Telepon |
: 021 2851 8059 |
| Mobile | : 0857 7664 0198 (Sales & Marketing) |
| Fax | : 021 2851 8058 |
| : sales@kitomaindonesia.com | marketing@kitomaindonesia.com | scales@kitomaindonesia.com | kitomascale@gmail.com |
