Mail Us at : sales@kitomaindonesia.com | Call Us 021 2851 8059

Kinco Servo FD422S-LA-000, FD422S-AA-000

 

 

Kitoma Indonesia : Kinco Servo FD422S-LA-000, FD422S-AA-000

Features

  • CANopen communication
  • Main Supply Voltage : AC220V ± 15% 47-63Hz
  • Rated Output Power (kW) : 0.2 - 2.3kW

Type Servo AC
Current : Min 4A, Max 25A
Output signal : CANopen
Output power : Min 0.2kW (0.27HP), Max 2.3kW (3.08HP)
Voltage : 380 VDC

 

FD422S suitable for servo motors

  • SMH60S-0020-30AAK-3LKH : Cable connector
  • SMH60S-0020-30ABK-3LKH : Cable connector and brake
  • SMH60S-0020-30AAK-3LKN : HFO standard connector
  • SMH60S-0020-30AAK-3LKM : Intercontec connector
  • SMH60S-0020-30ABK-3LKM : Intercontec connector with brake
  • SMH60S-0040-30AAK-3LKH : Cable connector
  • SMH60S-0040-30ABK-3LKH : Cable connector and brake
  • SMH60S-0040-30AAK-3LKN : HFO standard connector
  • SMH60S-0040-30AAK-3LKM : Intercontec connector
  • SMH60S-0040-30ABK-3LKM : Intercontec connector with brake
  • SMH80S-0075-30AAK-3LKH : Cable connector
  • SMH80S-0075-30ABK-3LKH : Cable connector and brake
  • SMH80S-0075-30AAK-3LKN : HFO standard connector
  • SMH80S-0075-30AAK-3LKM : Intercontec connector
  • SMH80S-0075-30ABK-3LKM : Intercontec connector with brake
  • SME60S-0020-30AAK-3LKH : Cable connector
  • SME60S-0020-30ABK-3LKH : Cable connector and brake
  • SME60S-0020-30AAK-3LKN : HFO standard connector
  • SME60S-0040-30AAK-3LKH : Cable connector
  • SME60S-0040-30ABK-3LKH : Cable connector and brake
  • SME60S-0040-30AAK-3LKN : HFO standard connector
  • SME80S-0075-30AAK-3LKH : Cable connector
  • SME80S-0075-30ABK-3LKH : Cable connector and brake
  • SME80S-0075-30AAK-3LKN : HFO standard connector


Technical Specifications

 

Main supply voltage Single-phase AC220V -20/+15% 47~63Hz
Control circuit voltage 18VDC~30VDC 1A
Rated current(RMS) 4A
Peak current(PEAK) 15A
Feedback signal 2500PPR (incremental encoder with 5V supply)
Brake chopper Use an external braking resistor according to application, mainly in occasion of quick stop
Brake chopper threshold DC380V±5V
Over-voltage alarming threshold DC400V±5V
Under-voltage alarming threshold DC200V±5V
Cooling method Natural air cooling
Weight(Kg) 1.2
Digital input specification 7 digital inputs, with COMI terminal for PNP (high level valid 12.5-30V) or NPN (low level valid) connection.
Digital input function Define freely according to requirement, supporting following functions: Driver enable,driver fault reset,driver mode control, proportional control, positive limit, negetive limit, homing signal,reverse command, internal speed section control, internal positive section control, quick stop, start homing, active command, switch electronic gear ratio, switch gain
Digital output specification 5 digital outputs,OUT1~OUT4 current is 100mA, BR+/BR- (Brake control ourtput ) current is 500mA, can drive brake device directly
Digital output function Define freely according to requirement, supporting following functions: Driver ready, driver fault, position reached, motor at zero speed, motor brake, motor speed reached, Z signal, maximum speed obtained in torque mode, motor brake, position limiting, reference found, multi-position reached.
Analog input 2 analog input, can be used to control speed and torque, the input range is -10V~10V.Output encoder signal is optional, can be used in the multiple axises synchronization, the max.
Encoder signal output function Output encoder signal is optional, can be used in the multiple axises synchronization, the max. output frequency is 2MHz
RS232 The max. baudrate is 115.2KHz, use JD-PC software to communicate with PC, or via free protocol to communicate with controller.
Protection functions Over-voltage protection,under-voltage protection,motor over-heat protection(IT),short-circuit protection,drive over-heat protection,etc.
RS485 The max. baudrate is 115.2KHz, use Modbus RTU protocol to communicate with controller.
CAN BUS The max. baudrate is 1MHz, use CANopen protocol to communicate with controller.
Operating temperature 0~40℃
Storage temperature -10℃~70℃
Humidity(non-condensing) Below 90%RH
Protection class IP20
Installation environment Installed in a dust-free,dry and lockable environment(such as in a electrical cabinet)
Installation mode Vertical installation
Height No power limitation below 1000m
Atmospheric pressure 86kpa~106kpa

 



Mechanical Dimension Diagram

Mechanical-Dimension-Diagram-FD422.jpg

 

Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :

 

Hubungi : Sales & Marketing
Alamat

: Simprug Plaza

 

  Jl. Simprug Raya Blok B.2 No.5 Cikarang Baru Jababeka II - Bekasi 17530 Jawa Barat - Indonesia

Telepon
: 021 2851 8059
Mobile : 0857 7664 0198 (Sales & Marketing)
Fax : 021 2851 8058
Email sales@kitomaindonesia.com  |  marketing@kitomaindonesia.com  |  scales@kitomaindonesia.com  | kitomascale@gmail.com