Fanuc Servo Amplifier Module 6089
Kitoma Indonesia : Fanuc Servo Amplifier Module 6089
GE Fanuc Servo Amplifier Unit A06B-6089-Hxxx modular design Alpha Servo Amplifier offered advantages of compact size and efficiency.
Note when replacing a 6089 Fanuc Servo Amplifier There are four channel switches above the 7-segment LED behind the terminal board cover on the front of the fanuc servo amplifier. These switches should be set as original before use of the servo amplifier.
The Early type Alpha Series Servo Amplifiers provided the latest IPM technology. GE Fanuc Amplifiers were available in seven sizes, with peak current limit ratings from 12 amps to 360 amps. In addition, both dual-axis and triple-axes amplifiers are offered for even more panel space savings.
Fanuc Servo Amplifier Module 6089 Series
A06B-6089-H101
A06B-6089-H104
A06B-6089-H105
A06B-6089-H106
A06B-6089-H201
A06B-6089-H204
A06B-6089-H206
A06B-6089-H208
A06B-6089-H209
A06B-6089-H210
A06B-6089-H101 Fanuc Servo Amplifier Unit - SVU1-12
SVU1-12
L Axis Rated Current 3A
Type A or Type B Interface
A06B-6089-H104 Fanuc Servo Amplifier Unit - SVU1-40
SVU1-40
L Axis Rated Current 12.5
Type A and Type B Interface
A06B-6089-H105 Fanuc Servo Amplifier Unit - SVU1-80
SVU1-80
L Axis Rated Current 18.7A
Type A and Type B Interface
A06B-6089-H201 GE Fanuc Servo Amplifier Unit - SVU2-12/12
SVU12/12
L Axis Rated Current 3A
M Axis Rated Current 3A
A06B-6089-H106 Fanuc Servo Amplifier Unit - SVU1-130
SVU130
L Axis Rated Current 52.2A
Type A and Type B Interface
A06B-6089-H204 Fanuc Servo Amplifier Unit - SVU2-12/40
SVU12/40
L Axis Rated Current 3A
M Axis Rated Current 8.8A
A06B-6089-H206 Fanuc Servo Amplifier Unit - SVU2-40/40
SVU40/40
L Axis Rated Current 8.8A
M Axis Rated Current 8.8A
Type A and Type B Interface
A06B-6089-H208 Fanuc Servo Amplifier Unit - SVU2-80/80
SVU80/80
L Axis Rated Current 10A
M Axis Rated Current 10A
Type A and Type B Interface
A06B-6089-H209 Fanuc Servo Amplifier Unit - SVU2-12/80
SVU2-80/80
L Axis Rated Current 3A
M Axis Rated Current 10A
Type A and Type B Interface
A06B-6089-H210 Fanuc Servo Amplifier Unit - SVU2-20/80
SVU80/80
L Axis Rated Current 5.9A
M Axis Rated Current 10A
Type A and Type B Interface
| Switch Number |
Position | Description |
|||||
| 1 |
On | Type B Interface |
|||||
| 1 |
Off | Type A Interface |
|||||
| 2 |
On | SVUC (If switch not correct VRDY alarm may appear) | |||||
| 2 |
Off | SVU (If switch not correct VRDY alarm may appear) | |||||
| Switch 3 |
Switch 4 | Description |
|||||
| On |
On | Drive uses built in discharge resistor | |||||
| On |
Off | Using seperate A06B-6089-H500 discharge resistor | |||||
| Off |
Off | Using seperate A06B-6089-H713 or A06B-6089-H714 discharge resistor | |||||
| Alarm Code |
Fault |
|||||
| 1 |
(HV) DC link over voltage alarm | |||||
| 2 |
(LV) Low control power voltage alarm | |||||
| 3 |
(LVDC) Low DC link voltage | |||||
| 4 |
(DCSW) Regenerative discharge control circuit failure alarm | |||||
| 5 | (DCOH) Over-Regenerative discharge alarm | |||||
| 7 | (DBRLY) Dynamic brake circuit failure alarm | |||||
| 8 | (HCL) L axis over- current alarm | |||||
| 8 Dot | (IPML) L axis IPM alarm | |||||
| 9 | (HCM) M axis over- current alarm | |||||
| 9 Dot | (IPMM) M axis IPM alarm | |||||
| b | (HCLM) L, M axis over-current alarm | |||||
| b Dot | (IPMLM) L, M axis IPM alarm | |||||
Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :
| Hubungi | : Sales & Marketing |
| Alamat |
: Simprug Plaza |
|
Jl. Simprug Raya Blok B.2 No.5 Cikarang Baru Jababeka II - Bekasi 17530 Jawa Barat - Indonesia |
|
| Telepon |
: 021 2851 8059 |
| Mobile | : 0857 7664 0198 (Sales & Marketing) |
| Fax | : 021 2851 8058 |
| : sales@kitomaindonesia.com | marketing@kitomaindonesia.com | scales@kitomaindonesia.com | kitomascale@gmail.com |
