Fanuc DC Velocity Control Unit Module 6047
Kitoma Indonesia : Fanuc DC Velocity Control Unit Module 6047
Fanuc DC Velocity control units. For Yellow cap Fanuc DC Motors (M Series) The DC Drives can be found on Fanuc System 3, 5, 6 and early 10 analogue and 11 Fanuc controls. Fanuc DC Servo Motor series consisted of 24 motors and 12 Fanuc DC Velocity control units single and twin varients including low inertia series for high frequency positioning with PWM drive, medium inertia series with PWM drive, and high inertia series with thyristor drive. This allows selection of the most suitable model for any size of machine tool. Fanuc DC Servo Motor series is a permanent magnet type DC motor specially developed and designed for machine tools. These motors have speed torque characteristics suitable both for high speed in the rapid traverse range and for heavy cutting in the low speed range. These motors can withstand heavy overload conditions in spite of their small size and light weight. The motors were driven with the below Fanuc Velocity control units.
PCB Board for this series A20B-0009-0320
This VCU requires a seperate discharge unit A06B-6047-H050
Fanuc DC Velocity Control Unit Module 6047 Series
A06B-6047-H001 : Single Axis Unit, For Motor Model 00M.
A06B-6047-H002 : Single Axis Unit, For Motor Model's 0M and 5M.
A06B-6047-H003 : Single Axis Unit, For Motor Model's 10M and 20M.
A06B-6047-H004 : Single Axis Unit, For Motor Model 30M.
A06B-6047-H040 : Single Axis Unit, For Motor Model's 10M and 20M.
A06B-6047-H041 : Single Axis Unit, For Motor Model 30M.
A06B-6047-H104 : Single Axis Unit.
A06B-6047-H201 : Twin Axis Unit, For Motor Model's 00M (both axis).
A06B-6047-H202 : Twin Axis Unit, L Axis Motor Model 00M and M Axis Motor Model 0M.
A06B-6047-H206 : Twin Axis Unit. L Axis Motor Model 0M and M Axis Motor Model 5M.
A06B-6047-H208 : Twin Axis Unit.
A06B-6047-H203 : Twin Axis Unit, L Axis Motor Model 0M and M Axis Motor Model 0M.
Alarm Code |
Fault |
|||||
BRK | Circuit Breaker Alarm | |||||
HVAL | High Voltage Alarm | |||||
HCAL | High Current Alarm | |||||
OVC | Overcurrent Alarm | |||||
TG | Tacho Generator Loss | |||||
DC | Discharge Alarm |
Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :
Hubungi | : Sales & Marketing |
Alamat |
: Simprug Plaza |
Jl. Simprug Raya Blok B.2 No.5 Cikarang Baru Jababeka II - Bekasi 17530 Jawa Barat - Indonesia |
|
Telepon |
: 021 2851 8059 |
Mobile | : 0857 7664 0198 (Sales & Marketing) |
Fax | : 021 2851 8058 |
: sales@kitomaindonesia.com | marketing@kitomaindonesia.com | scales@kitomaindonesia.com | kitomascale@gmail.com |