Mail Us at : sales@kitomaindonesia.com | Call Us 021 2851 8059

PLC Hitachi Micro-EH 20 Baseunit 24VDC

 

 

Kitoma Indonesia - PLC Hitachi Micro-EH 20 Baseunit 24VDC


  • EH-D20DT
  • EH-D20DTPS
  • EH-D20DR

 

Hitachi EH-D20DT, PLC, 12IN, 8OUT, NPN, base unit 24VDC

  • Very compact PLC.
  • Base unit 24VDC.
  • 12 Inputs
  • 8 transistor outputs (NPN)
  • 1 RS-232, RTC, 16k Flash memory.
  • IEC 61131-3 programming possible.
  • 32-bit RISC processor.
  • Speed ​​counter inputs.
  • PWM and pulse output.
  • Direct link HMI possible.

 

 

Specifications

 

Classification Model Name Specifications  
Power Input Output Remaks
20 Point
 
EH-D20DT DC 24V DC 24V×12 Transistor×8 Sink
EH-D20DTPS DC 24V DC 24V×12 Transistor×8
(short circuit protection)
Source
EH-D20DR DC 24V DC 24V×12 Relay×8 24

 

General Specifications

 

Item Specification
Power supply type AC DC
Power voltage 100/110/120V AC (50/60Hz),
200/220/240V AC (50/60Hz)
24V DC
Power voltage fluctuation range 85 to 264 V AC wide range 19.2 to 30V DC
Allowable momentary power failure 85 to 100V AC:
For a momentary power failure of less than 10 ms, operation continues
100 to 264 V AC:
For a momentary power failure of less than 20 ms, operation continues
19.2 to 30V DC:
For a momentary power failure of less than 10 ms, operation continues
Operating ambient temp. 0 to 55 °C
Storage ambient temp. -10 to 75 °C
Operating ambient humidity 5 to 95 % RH (no condensation)
Storage ambient humidity 5 to 95 % RH (no condensation)
Vibration proof Conforms to JIS C 0911
Noise resistance
  • Noise voltage 1,500Vpp Noise pulse width 100 ns, 1 µs(Noise created by the noise simulator is applied across the power supply module's input terminals. This is determined by our measuring method.)
  • Based on NEMA ICS 3-304
  • Static noise: 3,000V at metal exposed area
  • Conforms with EN50081-2 and EN50082-2
Supported standards Conforms with UL, CE markings and C-TICK
Insulation resistance 20 MΩ or more between the AC external terminal and the protection earth (PE) terminal (based on 500V DC megger)
Dielectric withstand voltage 1,500V AC for one minute between the AC external terminal and the protection earth (PE) terminal
Grounding Class D dedicated grounding (grounded by a power supply module)
Environment used No corrosive gases and no excessive dirt
Structure Attached on an open wall
Cooling Natural air cooling

 

 

 

Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :

 

Hubungi : Sales & Marketing
Alamat

: Simprug Plaza

 

  Jl. Simprug Raya Blok B.2 No.5 Cikarang Baru Jababeka II - Bekasi 17530

Telepon
: 021 2851 8058  |  021 2851 8059  |  021 3725 0521  |  021 4448 9918
Mobile : 0821 2570 0690  |  0858 9027 2127  |  0877 8228 6338
Fax : 021 2851 8058
Email : sales@kitomaindonesia.com  |  firman@kitomaindonesia.com  |  kitoma_kitoma@yahoo.co.id