Delta DVP-10PM PLC Series
Kitoma Indonesia : Delta DVP-10PM PLC Series
Pulse-train Motion Controller
High Speed command execution speed (basic command LD for 0.1375μs, application command MOV for 2.1μs and 1MHz differential output*4) to achieve precise motion control.
Applications
- Used for 2-axis servo positioning control
- Material cutting machine (high-speed servo control)
- Crane operations
- Material clipper controlled by the servo
- MPU points: 24
- Max. I/O points: 256
- Program capacity: 64k steps
- Built-in hardware digital filter for counting
- 6 high-speed counters (O.C. 200kHz*4, differential 200kHz*2), supporting U/D, U/D Dir, A/B, 4A/B counting modes
- 4 differential 1MHz outputs, supporting U/D, U/D Dir, A/B output modes
- Supports 1-speed (immediate stop after the mark arrives), 2-speed, zero return, MPG and single axis function
- Highly accurate PWM 200kHz output, resolution 0.3%
- Electronic gear function
- 8 high-speed captures (mark correction, frequency measurement), comparative output, mark/mask function (for bag making)
- 8 external interruptions for setting up rising- and falling-edge triggers, 1 timed interruption
- Highly efficient command execution. LD: 0.1375μs, MOV: 2.1μs
Electrical Specification
| Power supply voltage | 100 ~ 240 VAC (-15 to 10%), 50/60 Hz ± 5% |
| Fuse capacity | 2 A/250 VAC |
| Power consumption | 60 VA |
| DC24V current output | 500 mA |
| Power protection | 24 VDC, output short-circuited |
| Withstand voltage | 1,500 VAC (Primary-secondary); 1,500 VAC (Primary-PE); 500 VAC (Secondary-PE) |
| Insulation impedance | > 5 MΩ (all I/O point-to-ground 500 VDC) |
| Noise immunity | ESD: 8 kV Air Discharge, EFT: Power Line: 2 kV, Digital I/O: 1 kV, Analog & Communication I/O: 250 V |
| Earth | The diameter of grounding wire shall not be less than that of the L, N terminal of the power. (When many PLCs are used at the same time, make sure every PLC is properly grounded.) |
| Operation/storage | Operation: 0 to 55°C (temperature), 50 to 95% (humidity), pollution degree 2 Storage: -25 to 70°C (temperature), 5 to 95% (humidity) |
| Vibration/shock immunity | International standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/IEC61131-2 & IEC 68-2-27 (TEST Ea) |
| Weight (g) | 612 |
Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :
| Hubungi | : Sales & Marketing |
| Alamat |
: Simprug Plaza |
|
Jl. Simprug Raya Blok B.2 No.5 Cikarang Baru Jababeka II - Bekasi 17530 Jawa Barat - Indonesia |
|
| Telepon |
: 021 2851 8059 |
| Mobile | : 0857 7664 0198 (Sales & Marketing) | 0812 1165 3673 |
| Fax | : 021 2851 8058 |
| : sales@kitomaindonesia.com | marketing@kitomaindonesia.com | scales@kitomaindonesia.com | kitomascale@gmail.com |
