Inverter Fuji Frenic-Multi 3 phase 200V Series
Kitoma Indonesia - Inverter Fuji Frenic-Multi 3 phase 200V Series
Frenic-Multi Series High Performance Compact Inverters
Frenic-Multi 3 phase 200V standard type models
- FRN0.1E1S-2A = 0.1kW
- FRN0.2E1S-2A = 0.2kW
- FRN0.4E1S-2A = 0.4kW
- FRN0.75E1S-2A = 0.75kW
- FRN1.5E1S-2A = 1.5kW
- FRN2.2E1S-2A = 2.2kW
- FRN3.7E1S-2A = 3.7kW
- FRN5.5E1S-2A = 5.5kW
- FRN7.5E1S-2A = 7.5kW
- FRN11E1S-2A = 11kW
- FRN15E1S-2A = 15kW
Specification Frenic-Multi 3-phase 200V
| Item | Specifications | ||||||||||||
| Type (FRN***E1S-2A) | 0.1 | 0.2 | 0.4 | 0.75 | 1.5 | 2.2 | 3.7 | 5.5 | 7.5 | 11 | 15 | ||
| Applicable motor rating [kW] (*1) | 0.1 | 0.2 | 0.4 | 0.75 | 1.5 | 2.2 | 3.7 | 5.5 | 7.5 | 11 | 15 | ||
 |
Rated capacity [kVA] (*2) | 0.30 | 0.57 | 1.1 | 1.9 | 3.0 | 4.1 | 6.4 | 9.5 | 12 | 17 | 22 | |
| Rated voltage [V] (*3) | Three-phase 200V to 240V (with AVR function) | ||||||||||||
| Rated current [A] (*4) | 0.8 （0.7） |
1.5 （1.4） |
3.0 （2.5） |
5.0 （4.2） |
8.0 （7.0） |
11 （10） |
17 （16.5） |
25 （23.5） |
33 （31） |
47 （44） |
60 （57） |
||
| Overload capability | 150% of rated current for 1min, 200% - 0.5s | ||||||||||||
| Rated frequency [Hz] | 50, 60Hz | ||||||||||||
 |
Phases, voltage, frequency | Three-phase, 200 to 240V, 50/60Hz | |||||||||||
| Voltage/frequency variations | Voltage: +10 to -15% (Voltage unbalance (*8): 2% or less) Frequency: +5 to -5% | ||||||||||||
| Rated current [A] (*9) | (with DCR) | 0.57 | 0.93 | 1.6 | 3.0 | 5.7 | 8.3 | 14.0 | 21.1 | 28.8 | 42.2 | 57.6 | |
| (without DCR) | 1.1 | 1.8 | 3.1 | 5.3 | 9.5 | 13.2 | 22.2 | 31.5 | 42.7 | 60.7 | 80.1 | ||
| Required power supply capacity [kVA] (*5) | 0.2 | 0.3 | 0.6 | 1.1 | 2.0 | 2.9 | 4.9 | 7.4 | 10 | 15 | 20 | ||
 |
Torque [%] (*6) | 150 | 100 | 70 | 40 | 20 | |||||||
| Torque [%] (*7) | - | 150 | |||||||||||
| DC injection braking | Starting frequency: 0.1 to 60.0Hz, Braking time: 0.0 to 30.0s, Braking level: 0 to 100% of rated current | ||||||||||||
| Braking transistor | Built-in | ||||||||||||
| Applicable safety standards | UL508C, C22.2No.14, EN50178:1997 | ||||||||||||
| Enclosure (IEC60529) | IP20, UL open type | ||||||||||||
| Cooling method | Natural cooling | Fan cooling | |||||||||||
| Weight / Mass [kg] | 0.6 | 0.6 | 0.7 | 0.8 | 1.7 | 1.7 | 2.3 | 3.4 | 3.6 | 6.1 | 7.1 | ||
| (*1) | Fuji's 4-pole standard motor |
| (*2) | Rated capacity is calculated by assuming the output rated voltage as 220V for three-phase 200V series and 440V for three-phase 400V series. |
| (*3) | Output voltage cannot exceed the power supply voltage. |
| (*4) | When setting the carrier frequency (F26) to 3 kHz or less. Use the current ( ) or below when the carrier frequency setting is higher than 4kHz and continuously operating at 100%. |
| (*5) | Obtained when a DC REACTOR is used. |
| (*6) | Average braking torque obtained when reducing the speed from 60Hz with AVR control OFF (Varies with the efficiency of the motor.) |
| (*7) | Average braking torque obtained by use of external braking resistor (standard type available as option) |
|
(*8) |
Voltage unbalance [%] = Max voltage [V] - Min voltage [V] / Three-phase average voltage [V] x 67 (IEC 61800-3) If this value is 2 to 3%, use AC REACTOR (ACR: option). |
|
(*9) |
The value is calculated on assumption that the inverter is connected with a power supply capacity of 500kVA (or 10 times the inverter capacity if the inverter capacity exceeds 50kVA) and %X is 5%. |
Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :
| Hubungi | : Sales & Marketing |
| Alamat |
: Simprug Plaza |
|
Jl. Simprug Raya Blok B.2 No.5 Cikarang Baru Jababeka II - Bekasi 17530 Jawa Barat - Indonesia |
|
| Telepon |
: 021 2851 8059 |
| Mobile | : 0857 7664 0198 (Sales & Marketing) |
| Fax | : 021 2851 8058 |
| : sales@kitomaindonesia.com | marketing@kitomaindonesia.com | scales@kitomaindonesia.com | kitomascale@gmail.com |
