Kitoma Indonesia - Timbangan Vibra DME Series Density Scale

Density Measurement Balance
 

Density measurement & simple weight measurement - two in one

• Capacity density 220g
• Readability 0.01gg

Models Vibra DME Series

• DME-220E : 220g
• DME-220HE : 220g

Density measurement & simple weight measurement - two in one

Measurement the density

Vibra DME series is the balance specialized in density measurement. The value of the relative density and the volume can be easily measured. It is convenient for quality control in manufacturing line like rubber, plastic, etc.
 

Two use in one unit

DEM series can be available as standard precision balance when water tank is replaced with standard weighing pan. The weighing pan is included as standard.
 

The water temperature measuring and storing

Do the measurement of the water temperature. Then, set it to the balance. Accurate Relative Density measurement is done by the compensation by refenence water temperature.
 

Weight a sample in the water, and storing

Load the sample on the underwater Weighting-pan. When the weight in the water is indicated, push the Measure-key, and store to the weight data.
 

Weight a sample in the air, and storing

Load the sample on the Folding weighing-pan. When the weight in the air is indicated, push the Measure-key, and store to the balance the weight data.
 

The relative density and volume indication

The value of the relative density and the volume can be seen with the Mode-key. The delta mark points the symbols of the relative density or the volume on the display panel.
 

In case of the lighter sample than the water

Cover the sample with attached Underwater Sample Holder, and measure it.

Specifications

Common Specifications

Options

RS-232C Output
Rechargeable battery(12 Hour Charge, 32 Hour Operable)
* Battery cannot be used with the output as same time.
Hydrometer Kit (For DME-220H only)

Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :