Mail Us at : sales@kitomaindonesia.com | Call Us 021 2851 8059

Inverter Toshiba VFS15-4004PL-W 0.4kW 380-500VAC

 

 

Kitoma Indonesia : Inverter Toshiba VFS15-4004PL-W 0.4kW (0.5HP) 380-500VAC

Vector inverter Max motor power: 0.4kW; Out.voltage: 3x380VAC
Manufacturer part number: VFS15-4004PL1-W1
TME Symbol: VFS15-4004PL-W


Toshiba Tosvert VF-S15 Series AC Inverter for 0.4kW (0.5HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 1.5A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction or Permanent Magnet motor.

Size B3: 107mm Wide x 153mm Deep x 130mm High. IP20
Weight: 1.4kg.

Overload: 150% x 60 seconds, 200% x 0.5 seconds
Speed Control Range: 0.1-500Hz
Braking: Minimum 200 Ohm external resistor (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.



Fixed Keypad with Speed dial
3 Analogue Inputs, 6 Digital Inputs, 1 Analogue Output, 1 Digital Output, 2 Relay Contact sets, RJ45 port for Modbus-RTU RS485 Communications



Input Current: 2.1A
Input Voltage: 380-500V Three Phase ±10% at 50-60Hz ±5%
EMC Filters: IEC EN61800-3 Category C2 (Industrial and restricted Domestic) for motor cable lengths to 5m, C3 (Industrial) to 25m.



Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified].
Ventilation space above and below: 50mm.
Ventilation space at sides: 30mm (can be mounted side by side when top cover removed).
Heat Loss at max output: 30W
Mounting via 2 x 5mm holes at rear on 93mm x 121.5mm centres.



Manufacturer part number is VFS15-4004PL-W1. Replaces the VF-S11 series.

 

Specifications

Model VF-S15
Type of module Vector inverter
Max motor power 0.4kW
Inverter output voltage 3 x 380V AC
Three-phase power supply voltages range 3 x 380...500V AC
Input 1 properties 2 inputs for setting motor rotational speed by signals 0...10V, 4...20mA, 0...20mA or by means of the external potentiometer
Voltage output 0...10V
Current output 0/4mA...20mA
Electrical connection screw terminals
Mounting for wall mounting
The programming method keypad and potentiometer
Protection anti-overload OPP, motor earth fault, short circuit protection SCP
Kind of display used LED
Current consumption 1.5A
Manufacturer series VFS15

 

 

Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :

 

Hubungi : Sales & Marketing
Alamat

: Simprug Plaza

 

  Jl. Simprug Raya Blok B.2 No.5 Cikarang Baru Jababeka II - Bekasi 17530 Jawa Barat - Indonesia

Telepon
: 021 2851 8059  |  021 2851 8058
Mobile : 0821 2570 0690
Fax : 021 2851 8058
Email sales@kitomaindonesia.com  |  marketing@kitomaindonesia.com  |  scales@kitomaindonesia.com  | kitomascale@gmail.com