PLC Keyence KV-40DR Base unit 40 I/O 24VDC
Kitoma Indonesia - PLC Keyence KV-40DR Base unit 40 I/O 24VDC
Base unit, DC type, 24 Inputs, 16 Transistor (Sink) Outputs
PLC Visual KV series, Super-small Programmable Logic Control with Built-in Display
PLC Keyence KV-40DR
- Operation control: stored program system
- Power supply voltage: AC100-240 V 50/60Hz
- Input: 24 points
- Output: 16 points (Relay Output)
Specifications
Model |
KV-40DR |
|||
Type |
DC power supply type base unit |
|||
Input power supply voltage |
Base unit |
24 VDC (+ 10%, - 20%) |
||
Allowable instantaneous outage time |
Less than 2 ms |
|||
Internal current consumption (24 VDC conversion value) |
180mA or less |
|||
Expansion unit |
KV-E4X 20mA or less KV-E8X 25mA or less KV-E16X 35mA or less KV-E4T 25mA or lessKV-E8T(P) 40mA or less KV-E16T 60mA or less KV-E4R 40mA or less KV-E8R 70mA or lessKV-E16TP 70mA or less KV-E4XT(P) 30mA or less KV-E4XR 45mA or less KV-E16R 110mA or less |
|||
Other |
Operator panel KV-D20: 60 mA or less KL link adapter KL-N10V: 35 mA or less Programming console KZ-P3: 65 mA or less |
|||
Environmentalresistance |
Operating ambient temperature |
0 to 50°C (no freezing), 0 to 45°C (KZ-P3) |
||
Operating ambient humidity |
35 to 85% RH(no condensation) |
|||
Storage ambient temperature |
-20 to 70°C (no freezing) |
|||
Withstand voltage |
1,500 VAC for 1 minute (between the power supply terminal and the I/O terminals and between all the external terminals and the case) |
|||
Noise resistance |
1,500 Vp-p or more, pulse width: 1 μs, 50 ns (by way of a noise simulator), conforms to EN standards (EN 61000-4-2/-3/-4/-6) |
|||
Shock resistance |
Conforms to JIS C 0041, 150 m/s2 (15 G), operating time: 11 ms, 2 times in each of the 3 axial directions |
|||
Vibration resistance*1 |
Intermittent vibration |
Frequency: 10 to 57 Hz |
Amplitude: 0.075 mm |
|
Frequency: 57 to 150 Hz |
Acceleration: 9.8 m/s2 |
|||
Continuous vibration |
Frequency: 10 to 57 Hz |
Amplitude: 0.035 mm |
||
Frequency: 57 to 150 Hz |
Acceleration: 4.9 m/s2 |
|||
Insulation resistance |
50 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the input terminal and between all the external terminals and the case) |
|||
Operating environment |
Minimal amount of dust and corrosive gas present |
|||
Weight |
Base unit |
approx 330g |
||
Expansion unit |
KV-E4X: approx. 80 g, KV-E8X: approx. 100 g, KV-E16X: approx. 130 g, KV-E4T: approx. 80 g, KV-E8T (P): approx. 100 g, KV-E16T (P): approx. 130 g, KV-E4R: approx. 100 g, KV-E8R: approx. 130 g, KV-E16R: approx. 190 g, KV-E4XT (P): approx. 100 g, KV-E4XR: approx. 120 g |
|||
Other |
KZ-P3 approx 230g KV-D20 approx 160g KL-N10V approx 80g |
|||
*1 Conforms to JIS B 3502, IEC61131-2 |
Technical Specifications
Operation control method | Stored program method | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Input and output control method | Refresh method | |||||||||||||
Programming language | Extension ladder ladder chart method + method | |||||||||||||
Type of instruction | 22 species: 28 species application instruction: basic instruction four species: 26 species interrupt instruction instruction: |
|||||||||||||
Minimum scan time | 140μs | |||||||||||||
Instruction processing speed | Basic instruction | Minimum 0.7μs | ||||||||||||
Application Instruction | Minimum 6.4μs | |||||||||||||
Program capacity | 4000 step | |||||||||||||
Maximum number of attached expansion units | Units 7 (, KL-N10V QL-B1 are excluded) | |||||||||||||
Input and output points (including 40-point input and output base unit) |
(When the maximum number of expansion unit and extended QL series) 10 to 280 points | |||||||||||||
10 to 152 points (maximum number of expansion when expansion units) | ||||||||||||||
Internal auxiliary relay | 1000 ~ 1915,3000 ~ 2560 17 9152560 17 915 points (including a relay for the QL Series) |
|||||||||||||
Auxiliary | 160 points from 2,000 to 2,915 | |||||||||||||
Data memory (16 bits) | 2000 words DM0000 ~ DM1999 | |||||||||||||
Temporary data memory (16 bits) | 32 words TM00 ~ TM31 | |||||||||||||
Timer / counter |
|
|||||||||||||
Digital trimmer | (Set in the access window) 2 points | |||||||||||||
High-speed counter | Phase two-point high-speed counter 30kHz2 (0 ~ 65535 counts) |
Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :
Hubungi | : Sales & Marketing |
Alamat |
: Simprug Plaza |
Jl. Simprug Raya Blok B.2 No.5 Cikarang Baru Jababeka II - Bekasi 17530 |
|
Telepon |
: 021 2851 8058 | 021 2851 8059 | 021 3725 0521 | 021 4448 9918 |
Mobile | : 0821 2570 0690 | 0858 9027 2127 | 0877 8228 6338 |
Fax | : 021 2851 8058 |
: sales@kitomaindonesia.com | emma@kitomaindonesia.com | kitoma_kitoma@yahoo.co.id |