Mail Us at : sales@kitomaindonesia.com | Call Us 021 2851 8059

KV Nano Series Expansion I/O Unit PLC Keyence

 

 

Kitoma Indonesia - KV Nano Series Expansion I/O Unit PLC Keyence

 

KV Nano Programmable Logic Controller Expansion I/O unit

 

Expansion I/O Lineup

 

8 point terminal block type

  • KV-N8EX : DC input 8 point
  • KV-N8ER : Relay output 8 point
  • KV-N8ET(P) : Transistor output 8 point


16 point terminal block type

  • KV-N16EX : DC input 16 point
  • KV-N16ER : Relay output 16 point
  • KV-N16ET(P) : Transistor output 16 point


Input/Output combined type

  • KV-N8EXR : DC input 8 points/relay output 8 points
  • KV-N8EXT : DC input 8 points/transistor output 8 points


16 point connector type

  • KV-NC16EX : DC input 16 points
  • KV-NC16ET(P) : Transistor output 16 points


32 point connector type

  • KV-NC32EX : DC input 32 points
  • KV-NC32ET(P) : Transistor output 32 points


8 point terminal block type

  • KV-NC8ER : Relay output 8 point


16 point connector type (the photograph shows the KV-NC16EXT)

  • KV-NC16EXT : DC input 16 points/transistor output 16 points
  • KV-NC32EXT : DC input 32 points/transistor output 32 points

 

8 point terminal block type
  - KV-N8EX
  - KV-N8ER
  - KV-N8ET(P)
16 point terminal block type
  - KV-N16EX
  - KV-N16ER
  - KV-N16ET(P)

Input/Output combined type
  - KV-N8EXR
  - KV-N8EXT

KV-N8EX.jpg KV-N8EXR.jpg KV-N8EXR.jpg

 

16 point connector type
  - KV-NC16EX
  - KV-NC16ET(P)

32 point connector type
  - KV-NC32EX
  - KV-NC32ET(P)

8 point terminal block type
  - KV-NC8ER

KV-NC16EX.jpg     KV-NC16EX.jpg KV-NC32EX.jpg     KV-NC32EX.jpg KV-NC8ER.jpg      KV-NC8ER.jpg

 

16 point connector type
   - KV-NC16EXT
   - KV-NC32EXT

   

KV-NC32EX.jpg

   

 

Features

  • High Speed
  • High Performance Built-in Positioning
  • Utilising the High Speed
  • Modbus Master/Slave Function
  • Serial PLC Link Function
  • LCD Display Unit (Acces Window)
  • Analogue unit
  • High Reliability
  • Enhanced Password/Security Function

 

Specifications - Expansion input unit

 

Model KV-N8EX
(8 points)
KV-N16EX
(16 points)
External connection method Terminal block
Input terminals 24 VDC mode 5 VDC mode 24 VDC mode 5 VDC mode
Maximum input voltage 26.4 VDC
Rated input voltage 24 VDC/5.3 mA 5 VDC/1 mA 24 VDC/5.3 mA 5 VDC/1 mA
Minimum ON voltage 19 V 3.5 V 19 V 3.5 V
Maximum OFF current 1.5 mA 1.5 mA
Maximum OFF voltage 1.5 V 1.5 V
Common method 8 points/1 common (2 terminals) 1. 16 points/1 common (2 terminals) 1.
Input time constant
(four-level switching)

Input time
constant setting
OFF to ON ON to OFF
Typ. Max. Typ. Max.
25 μs 10 μs 50 μs 50 μs 150 μs
300 μs 240 μs 290 μs 280 μs 390 μs
1 ms 1 ms 1.2 ms 1 ms 1.2 ms
10 ms 10 ms 11 ms 10 ms 11 ms

Input impedance 4.3 kΩ
Internal current consumption 20 mA or less
Weight 150 g 220 g

1. The KV-N8EX and KV-N16EX have 2 COM terminals, but these are shared internally.

 

Specifications - Expansion output unit

 

Model KV-N8ER
(8 points)
KV-N16ER
(16 points)
KV-N8ET(P)
(8 points)
KV-N16ET(P)
(16 points)
Output mode Relay MOSFET output
With overcurrent protection function 3., 5.
External connection method Terminal block
Rated load 250 VAC/30 VDC, 2A 30 VDC, 0.5 A
Leakage current at OFF 100 μA or less
Residual voltage at ON 0.8 VDC or less (with 0.5 A output)
0.6 VDC or less (with 0.3 A output)
ON resistance 50 mΩ or less
Common method Independent 4 points/
1 common
(8 terminals) 1.
8 points/
1 common
(4 terminals) 2.
16 points/
1 common
(8 terminals) 2., 4.
Response time OFF to ON 10 ms or less 100 μs or less
(with a load of 1 mA or more)
ON to OFF 200 μs or less
(with a load of 1 mA or more)
Relay life Electrical: 100000 cycles or more
(20 cycles/minute)
Mechanical: 20000000 cycles or more
Relay replacement Impossible
Internal current
consumption
60 mA or less 100 mA or less 30 mA or less 40 mA or less
Weight 230 g 260 g 160 g 210 g
  1. The KV-N16ER has two terminals for each of C0, C1, C2, and C3 respectively, which are shorted internally. (C0, C1, C2, and C3 are independent.)
  2. The KV-N8ET(P) and KV-N16ET(P) COM terminals are shorted internally.
  3. If even a single overcurrent is detected, the protection operation (output turned OFF) and automatic recovery are repeated for all outputs within the shared common 4, until the cause of the problem is removed.
  4. For KV-N16ET(P), the outputs within the shared common which are protected when overcurrents are detected are outputs 000 to 007, or outputs 008 to 015.
  5. Sink output types use MOSFET (N-ch) output. Source output types use MOSFET (P-ch) output.

 

Specifications - Expansion I/O unit

 

Model KV-N8EXR
(8 + 8 points)
KV-N8EXT
(8 + 8 points)
External connection method Terminal block
Input Number of inputs 8
Input mode 24 VDC mode 5 VDC mode 24 VDC mode 5 VDC mode
Maximum input voltage 26.4 VDC
Rated input voltage 24 VDC/5.3 mA 5 VDC/1 mA 24 VDC/5.3 mA 5 VDC/1 mA
Minimum ON voltage 19 V 3.5 V 19 V 3.5 V
Maximum OFF current 1.5 mA 1.5 mA
Maximum OFF voltage 1.5 V 1.5 V
Common method 8 points/1 common (1 terminal) 1.
Input time constant
Input time
constant setting
OFF to ON ON to OFF
Typ. Max. Typ. Max.
25 μs 10 μs 50 μs 50 μs 150 μs
300 μs 240 μs 290 μs 280 μs 390 μs
1 ms 1 ms 1.2 ms 1 ms 1.2 ms
10 ms 10 ms 11 ms 10 ms 11 ms

Input impedance 4.3 kΩ
Output Number of outputs 8
Output mode Relay MOSFET (N-ch)
(with overcurrent protection function) 4.
Rated load 250 VAC/30 VDC, 2A 30 VDC, 0.5 A
Leakage current at OFF 100 μA or less
Residual
voltage at ON
0.8 VDC or less (with 0.5 A output)
0.6 VDC or less (with 0.3 A output)
ON resistance 50 mΩ or less
Common method 4 points/1 common
(2 terminals) 1., 2.
8 points/1 common
(4 terminals) 1., 3.
Operation
time
OFF to ON 10 ms or less 100 μs or less
(with a load of 1 mA or more)
ON to OFF 200 μs or less
(with a load of 1 mA or more)
Relay life Electrical: 100000 cycles or more
(20 cycles/minute)
Mechanical: 20000000 cycles or more
Relay replacement Impossible
Internal current
consumption
60 mA or less 30 mA or less
Weight 230 g 210 g
  1. The input COM and output COM terminals are independent.
  2. The KV-N8EXR has two C1 output terminals and two C2 output terminals, but each pair of these terminals is shared internally. (C1 and C2 are isolated.)
  3. The KV-N8EXT has four COM output terminals, but these terminals are shared internally.
  4. If even a single overcurrent is detected, the protection operation (output turned OFF) and automatic recovery are repeated for all outputs within the shared common, until the cause of the problem is removed.

 

 

Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :

 

Hubungi : Sales & Marketing
Alamat

: Simprug Plaza

 

  Jl. Simprug Raya Blok B.2 No.5 Cikarang Baru Jababeka II - Bekasi 17530

Telepon
: 021 2851 8058  |  021 2851 8059  |  021 3725 0521  |  021 4448 9918
Mobile : 0821 2570 0690  |  0858 9027 2127  |  0877 8228 6338
Fax : 021 2851 8058
Email : sales@kitomaindonesia.com  |  emma@kitomaindonesia.com  |  kitoma_kitoma@yahoo.co.id