KV-5000 CPU 24-point I/O PLC Keyence
Kitoma Indonesia - KV-5000 CPU 24-point I/O PLC Keyence CPU (Building Block type)
Ultra High-Speed PLC
With Ethernet port installed as standard, PC connection and a PLC link can be used easily
Ethernet Compatible CPU Unit KV-5000
Realtime Logic Controller
- Built-in 100 Mbps Ethernet port
- Compatible with open network FL-net
- Built-in ultra high-speed ladder execution engine KV VELOCE II
- 64 bit wide SDRAM with high capacity 260k steps
KV-5000 CPU feature
- KV VELOCE II
- USB port
- FTP server
- KV script
- High capacity 260k steps
- Built-in I/O
- Simple PLC Link
- Ethernet/FL-net compatible
- FTP Client
- KV-BT1 compatible
Specifications
Model |
KV-5000 |
|||
CPU unit performance specifications |
Arithmetic control method |
Stored program method |
||
I/O control method |
Refresh method |
|||
Programming language |
Expansion ladder, KV script, mnemonic |
|||
Instruction execution speed |
Basic instruction |
10 ns minimum |
||
Application instruction |
20 ns minimum |
|||
Program capacity |
Approx. 260,000 steps |
|||
Maximum number of I/O units that can be attached |
16, 48 when an extension unit is connected |
|||
General specifications |
Shock resistance |
Acceleration: 150 m/s2, operating time: 11 ms, 2 times in each of the X, Y, and Z directions |
||
CPU unit performance specifications |
Maximum number of inputs/outputs |
3,096 maximum when expanded (when extended to 2 KV-EB1S/EB1R units; 64-I/O unit) |
||
Input relay (R) |
16,000 total, 1 bit (R00000 to R99915) |
|||
Output relay (R) |
||||
Internal auxiliary relay (R) |
||||
Link relay (B) |
16,384, 1 bit (B0000 to B3FFF) |
|||
Internal auxiliary relay (MR) |
16,000, 1 bit (MR00000 to MR99915) |
|||
Latch relay (LR) |
16,000, 1 bit (LR00000 to LR99915) |
|||
Weight |
Approx. 320 g, start unit: approx. 20 g, end unit: approx. 30 g |
|||
Control relay (CR) |
640, 1 bit (CR0000 to CR3915) |
|||
Timer (T) |
4,000, 32 bits (T0000 to T3999) |
|||
Counter (C) |
4,000, 32 bits (C0000 to C3999) |
|||
Data memory (DM) |
65,535, 16 bits (DM00000 to DM65534) |
|||
Number of instructions |
Basic instructions: 81 kinds and 171 instructions, application instructions: 43 kinds and 60 instructions, calculation instructions: 115 kinds and 293 instructions, expansion instructions: 96 kinds and 142 instructions, total: 335 kinds and 666 instructions |
|||
Extended data memory (EM) |
65,535, 16 bits (EM00000 to EM65534) |
|||
File register |
Current bank (FM) |
131,072, 16 bits (FM00000 to FM32767 × 4 banks) |
||
Consecutive number method (ZF) |
131,072, 16 bits (ZF000000 to ZF131071) |
|||
Link register (W) |
16,384, 16 bits (W0000 to W3FFF) |
|||
Temporary memory (TM) |
512, 16 bits (TM000 to TM511) |
|||
High-speed counter (CTH) |
2, 32 bits (CTH0 and CTH1), auto reset counter*5 (input response: 100 kHz [single-phase], 50 kHz [phase difference]), during line-driver input*6 |
|||
High-speed counter converter (CTC) |
4, 32 bits (2 per high-speed counter) |
|||
Index register (Z) |
12, 32 bits (Z1 to Z12) |
|||
Control memory (CM) |
6,000, 16 bits (CM0000 to CM5999) |
|||
Positioning pulse output |
2 (maximum output frequency: 100 kHz) |
|||
Power off holding function |
Devices: Target devices*2 |
By way of the battery, 5 years (when performing power off holding with an ambient usage temperature of 25°C) |
||
Self-diagnosis function |
CPU error, RAM error, other |
|||
General specifications |
Power voltage |
24 VDC (± 10%) |
||
CPU unit performance specifications |
Internal current consumption (excluding current for driving input circuits) |
320mA or less |
||
General specifications |
Operating ambient temperature |
0 to 50°C (no freezing)*7*8 |
||
Ambient storage temperature |
-20 to +70°C*7 |
|||
Operating ambient humidity |
10 to 95%RH (no condensation)*7 |
|||
Storage relative humidity |
||||
Withstand voltage |
1,500 VAC for 1 minute between the power supply terminal and the I/O terminals and between all the external terminals and the case |
|||
Noise resistance |
1,500 Vp-p or more, pulse width: 1 μs, 50 ns (by way of a noise simulator) |
|||
Vibration resistance*1 |
Intermittent vibration |
Frequency: 5 to 9 Hz |
Half amplitude: 3.5 mm |
|
Frequency: 9 to 150 Hz |
Acceleration: 9.8 m/s2 |
|||
CPU unit performance specifications |
CPU unit I/O |
Input: 16, output: 8, input common: 7 (000 to 009: 1 common, 010 to 015: 6 commons), output common: 1 |
||
General specifications |
Vibration resistance*1 |
Continuous vibration |
Frequency: 5 to 9 Hz |
Half amplitude: 1.75 mm |
CPU unit performance specifications |
Number of comments and labels that can be stored in the main unit |
Device comment |
Approx. 96,000 (260,000-step ladder with no labels) |
|
General specifications |
Vibration resistance*1 |
Continuous vibration |
Frequency: 9 to 150 Hz |
Acceleration: 4.9 m/s2 |
CPU unit performance specifications |
Number of comments and labels that can be stored in the main unit |
Labels |
Approx. 137,000 (260,000-step ladder with no device comments) |
|
General specifications |
Insulation resistance |
50 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the I/O terminals and between all the external terminals and the case) |
||
CPU unit performance specifications |
Power off holding function |
Program memory |
Flash ROM rewritable 100,000 times |
|
General specifications |
Operating environment |
Minimal amount of dust and corrosive gas present |
||
Operating altitude |
2000m or less |
|||
Overvoltage category |
II (when the KV-U7 is being used) |
|||
Pollution degree |
2 |
|||
CPU unit input specifications |
R00000 to R00009 (10 general-purpose inputs) |
24 VDC input mode*3 |
Maximum input voltage |
DC26.4V |
Input rated voltage |
24 VDC (3.5 mA*9) |
|||
Minimum ON voltage |
DC19V |
|||
Maximum OFF current |
1.5mA |
|||
Maximum OFF voltage |
- |
|||
Common ground |
10/common (2 terminals) |
|||
Input time constant |
Normal: 10 ms; when using the HSP instruction: 10 μs; when control relay CR2305 is ON: 10 μs to 10 ms, switchable between 8 levels (set with CM1620) |
|||
5 VDC input mode*3 |
Maximum input voltage |
DC26.4V |
||
Input rated voltage |
5 VDC (1 mA*9) |
|||
R00010 to R00013 (high-speed A-phase/B-phase input, 2 ch, total 4 inputs) |
Line-driver input |
Connection terminal number (voltage) |
8, 11, 28, 31 (+5 V) |
|
R00000 to R00009 (10 general-purpose inputs) |
5 VDC input mode*3 |
Minimum ON voltage |
DC4.5V |
|
Maximum OFF current |
- |
|||
Maximum OFF voltage |
DC1.5V |
|||
Common ground |
10/common (2 terminals) |
|||
Input time constant |
Normal: 10 ms; when using the HSP instruction: 10 μs; when control relay CR2305 is ON: 10 μs to 10 ms, switchable between 8 levels (set with CM1620) |
|||
R00010 to R00013 (high-speed A-phase/B-phase input, 2 ch, total 4 inputs) |
Line-driver input |
Maximum input voltage |
DC5.5V |
|
Input rated voltage |
― |
|||
Minimum ON voltage |
DC2.0V |
|||
Maximum OFF current |
― |
|||
5 VDC input (open collector) |
Connection terminal number (voltage) |
8, 11, 28, 31 (+5 V) |
||
Line-driver input |
Maximum OFF voltage |
DC1.0V |
||
Common ground |
Independent common |
|||
Input time constant |
Normal: 10 ms; when using the HSP instruction: 10 μs; when control relay CR2305 is ON: 10 μs to 10 ms, switchable between 8 levels (set with CM1620) |
|||
Response frequency |
100 kHz input signal: line driver, corresponds to AM26LS31; duty: 50% |
|||
5 VDC input (open collector) |
Maximum input voltage |
DC5.5V |
||
Input rated voltage |
5 VDC (20 mA*9) |
|||
Minimum ON voltage |
DC2.0V |
|||
Maximum OFF current |
- |
|||
Maximum OFF voltage |
DC1.0V |
|||
Common ground |
Independent common |
|||
24 VDC input (open collector) |
Connection terminal number (voltage) |
7, 10, 27, 30 (+24 V) |
||
5 VDC input (open collector) |
Input time constant |
Normal: 10 ms; when using the HSP instruction: 10 μs; when control relay CR2305 is ON: 10 μs to 10 ms, switchable between 8 levels (set with CM1620) |
||
Response frequency |
60 kHz, 5V ± 10%, duty: 50% |
|||
24 VDC input (open collector) |
Maximum input voltage |
DC26.4V |
||
Input rated voltage |
24 VDC (6.5 mA*9) |
|||
Minimum ON voltage |
DC19V |
|||
Maximum OFF current |
1.5mA |
|||
Maximum OFF voltage |
- |
|||
Common ground |
Independent common |
|||
R00014 to R00015 (high-speed Z-phase input, 2 ch, total 2 inputs) |
Line-driver input |
Connection terminal number (voltage) |
14, 34 (+5 V) |
|
R00010 to R00013 (high-speed A-phase/B-phase input, 2 ch, total 4 inputs) |
24 VDC input (open collector) |
Input time constant |
Normal: 10 ms; when using the HSP instruction: 10 μs; when control relay CR2305 is ON: 10 μs to 10 ms, switchable between 8 levels (set with CM1620) |
|
Response frequency |
60 kHz, 24 V ± 10%, duty: 50% |
|||
R00014 to R00015 (high-speed Z-phase input, 2 ch, total 2 inputs) |
Line-driver input |
Maximum input voltage |
DC5.5V |
|
Input rated voltage |
- |
|||
Minimum ON voltage |
DC2.0V |
|||
Maximum OFF current |
- |
|||
Maximum OFF voltage |
DC1.0V |
|||
Common ground |
Independent common |
|||
5 VDC input (open collector) |
Connection terminal number (voltage) |
14, 34 (+5 V) |
||
Line-driver input |
Input time constant |
Normal: 10 ms; when using the HSP instruction: 10 μs; when control relay CR2305 is ON: 10 μs to 10 ms, switchable between 8 levels (set with CM1620) |
||
5 VDC input (open collector) |
Maximum input voltage |
DC5.5V |
||
Input rated voltage |
5 VDC (8.3 mA*9) |
|||
Minimum ON voltage |
DC2.0V |
|||
Maximum OFF current |
- |
|||
Maximum OFF voltage |
DC1.0V |
|||
Common ground |
Independent common |
|||
Input time constant |
Normal: 10 ms; when using the HSP instruction: 10 μs; when control relay CR2305 is ON: 10 μs to 10 ms, switchable between 8 levels (set with CM1620) |
|||
24 VDC input (open collector) |
Connection terminal number (voltage) |
13, 33 (+24 V) |
||
Maximum input voltage |
DC26.4V |
|||
Input rated voltage |
24 VDC (3.5 mA*9) |
|||
Minimum ON voltage |
DC19V |
|||
Maximum OFF current |
1.5mA |
|||
Maximum OFF voltage |
- |
|||
Common ground |
Independent common |
|||
Input time constant |
Normal: 10 ms; when using the HSP instruction: 10 μs; when control relay CR2305 is ON: 10 μs to 10 ms, switchable between 8 levels (set with CM1620) |
|||
CPU unit output specifications |
R00500 to R00503 (4 high-speed outputs) |
Output |
Transistor NPN output |
|
Rated load |
DC30V 0.1A |
|||
Peak load current |
0.2A |
|||
Maximum voltage (at OFF) |
DC30V |
|||
Leakage current (at OFF) |
100 μA or less |
|||
Residual voltage (at ON) |
DC0.6V or less |
|||
Common ground |
8/common |
|||
ON/OFF response time*4 |
OFF to ON: 1 μs or less, ON to OFF: 5 μs or less |
|||
Output frequency |
100 kHz (5 to 100 mA) |
|||
R00504 to R00507 (4 general-purpose outputs) |
Output |
Transistor NPN output |
||
Rated load |
DC30V 0.1A |
|||
Peak load current |
0.2A |
|||
Maximum voltage (at OFF) |
DC30V |
|||
Leakage current (at OFF) |
100 μA or less |
|||
Residual voltage (at ON) |
DC0.6V or less |
|||
Common ground |
8/common |
|||
ON/OFF response time*4 |
OFF to ON: 5 μs or less, ON to OFF: 30 μs or less |
|||
Output frequency |
10 kHz (5 to 100 mA) |
|||
CPU unit + 5 V power output specifications |
Voltage |
5 VDC ± 10% |
||
Current |
100 mA maximum |
Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :
Hubungi | : Sales & Marketing |
Alamat |
: Simprug Plaza |
Jl. Simprug Raya Blok B.2 No.5 Cikarang Baru Jababeka II - Bekasi 17530 |
|
Telepon |
: 021 2851 8058 | 021 2851 8059 | 021 3725 0521 | 021 4448 9918 |
Mobile | : 0821 2570 0690 | 0858 9027 2127 | 0877 8228 6338 |
Fax | : 021 2851 8058 |
: sales@kitomaindonesia.com | emma@kitomaindonesia.com | kitoma_kitoma@yahoo.co.id |