MR-J3 60A Servo Amplifiers Mitsubishi 0.6kW
Kitoma Indonesia - MR-J3 60A Servo Amplifiers Mitsubishi 0.6kW
Servo Amplifiers 0.6kW 3-Phase 200-240VAC, 1-phase 200-240VAC
High response, high precision
Performance of frequency response speed (900 z) and high resolution encoder 262144p/rev (18-bit) standard servo motor, high speed positioning and low-speed stability of for both the.
Compact and flexible
Conventional ratio 40% （ 400 W ratio ） of realized space saving footprint,. You can reduce the servo amplifier terminal block connector of the wiring.
Advanced tuning capabilities
By our own model application control and Auto Tuning feature the evolution's specifications tuning to change the response value only of the adjustment.
Feature
High resolution encoder 262144p/rev (18bit)
- High resolution encoder from high-and low-speed based on the adoption of stability can be realized.
- Reduction of cogging torque reduced motor torque fluctuations by.
High speed positioning of one-time gains
- Hi-speed, high-torque motor HF series. Features of high-speed frequency response (900Hz), you can shorten the time by positioning.
Absolut encoder is standard-equipped
- Without a servo motor in the servo amp Exchange battery (MR-J3BAT) for mounting the origin does not require absolute return (before remapping) you can change the way.
Simple adjustment does not require cumbersome gain adjustment, servo's unique
An improved real-time auto-tuning (response settings can be set more closely!)
Our proprietary model for response control and improved Auto-Tuning feature by setting response change the settings just OK!!
Servo Motor Compatible
- HF-SP51
- HF-SP52
- HF-SP51B
- HF-SP52B
- HC-LP52
- HC-LP52B
Specifications
| Product Series | MELSERVO-J3 series | |
| Type | 3-phase 200-230 VAC servo generic interface or 1-phase 200 ~ 230 VAC | |
| Product no. | MR-J3-60A | |
| Main circuit power supply | Voltage class | AC200V |
| Voltage and frequency | 3-phase AC 200 ~ 230 V／50, 60 Hz or 1-phase AC 200 ~ 230 V／50, 60 Hz | |
| Permissible voltage fluctuations | If the three phase AC 200 ~ 230 V: If 3-phase AC 170-253 V, 1-phase AC 200 ~ 230 V single-phase AC170-253 V | |
| Permissible frequency fluctuation | Within ± 5% | |
| Power supply control circuit | Voltage and frequency | 1- phase AC 200 ~ 230 V／50, 60 Hz |
| Permissible voltage fluctuations | 1-phase AC170-253 V | |
| Permissible frequency fluctuation | Within ± 5% | |
| Input (W) | 30 | |
| Directive interface | Generic interface | |
| Interface power supply | DC24V ±10 (have current capacity: 300 mA) 10% | |
| Regenerative resistor tolerance regenerative power (W) | Amplifier built-in resistor | 10 |
| When you use the standard accessories | − | |
| Control method | Sine-wave PWM control and current control method | |
| Dynamic brake | Built-in | |
| Protection feature | Overload current interruption, regeneration over voltage cut-off, overload cut-off (thermal electrons), servo motor overheating protection, detection instrument error protection, regenerative fault protection, low voltage and instantaneous power failure protection, over speed protection, error overload protection | |
| Position control mode | The maximum input pulse frequency | 1 Mpps (differential receiver at), 200 kpps (when open-collector) |
| Positioning feedback pulse | Per 1 rotation servo motor, encoder resolution: 262144 p/rev | |
| Command pulse ratio | Electronic gear A/B Times A=1~1048576, B=1~1048576 1/10 < A/B < 2000 | |
| Positioning completion. width | From 0 ~ ± 10,000 pulse (the pulse unit of the directive) | |
| Excessive errors | ± 3 rpm | |
| Torque limitation | Parameter settings or by external analog input （ DC 0 ~ + 10 V, the maximum torque ） | |
| Speed control mode | Speed control range | Analog speed command 1: 2000 and internal speed command 1: 5000 |
| Analog speed command input | DC 0 ~ ± 10 V, rated rotation speed (rotational speed in the 10 V can be changed by parameter No.PC12) | |
| Speed change rate | ± 0.01% or less (load variation from 0 to 100%), 0% （ power fluctuation ± 10% ）, ± 0.2% below （ ambient temperature 25 ° c ± 10 ° c ） only analog speed command | |
| Torque limitation | Parameter settings or by external analog input （ DC 0 ~ + 10 V, the maximum torque ） | |
| Torque control mode | Analog torque inputs | DC 0 ~ ±8 V, the maximum torque （ input impedance 10-12 k Ω ） |
| Speed limit | Parameter settings or by external analog input （ DC 0 to ± 10 V, rated speed ） | |
| Structure | Cold, open (IP00) | |
| Environment | Ambient temperature | 0 ~ 55 ° c (not freezing), save: -20 ~ 65 ° c (not freezing) |
| Ambient humidity | 90% RH (non-condensing that), storage: 90% RH (non-condensing that) | |
| Atmosphere | Not indoors not exposed to direct sunlight, corrosive gas, inflammable gas, oil mist and dust | |
| Elevation | Less than 1000 m above sea level | |
| Vibration | 5.9m/s2 below | |
| Weight (kg) | 1.0 | |
Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :
| Hubungi | : Sales & Marketing |
| Alamat |
: Simprug Plaza |
|
Jl. Simprug Raya Blok B.2 No.5 Cikarang Baru Jababeka II - Bekasi 17530 |
|
| Telepon |
: 021 2851 8058 | 021 2851 8059 | 021 3725 0521 | 021 4448 9918 |
| Mobile | : 0821 2570 0690 | 0858 9027 2127 | 0877 8228 6338 |
| Fax | : 021 2851 8058 |
| : sales@kitomaindonesia.com | marketing@kitomaindonesia.com | kitoma_kitoma@yahoo.co.id |
