MR-J3 200A Servo Amplifier Mitsubishi 2.0kW
Kitoma Indonesia - MR-J3 200A Servo Amplifier Mitsubishi 2.0kW
Universal Servo interface 2.0kW for 3-phase 200-230VAC
Description
High response, high precision
Performance of frequency response speed (900 z) and high resolution encoder 262144p/rev (18-bit) standard servo motor, high speed positioning and low-speed stability of for both the.
Compact and flexible
Conventional ratio 40% （ 400 W ratio ） of realized space saving footprint,. You can reduce the servo amplifier terminal block connector of the wiring.
Advanced tuning capabilities
By our own model application control and Auto Tuning feature the evolution's specifications tuning to change the response value only of the adjustment.
Advanced vibration suppression for outstanding adaptation to machine requirements
Auto tuning for extremely fast setup and installation
Optimum cost/benefit ratio
Absolute position encoder included as standard equipment
Minimum wiring overheads thanks to Plug & Play configuration and automatic motor identification
Support global standard
Detail
- Mitsubishi AC Servo Amplifier MR-J3-200A
- Power : 2.0kW
- Input : 10.5 A
- AC Voltage : 200-230 VAC
- Phase : 3-phase
- Frequency : 50/60Hz
- Output : 170V 0-360Hz 6.0 A
- Protect Feature : Totally Enclosed
Servo Motor Compatible
- HF-SP 121
- HF-SP 121B
- HF-SP 201
- HF-SP 201B
- HF-SP 152
- HF-SP 152B
- HF-SP 202
- HF-SP 202B
- HF-JP 153
- HF-JP 203
- HF-JP 79
- HF-JP 103
- HC-LP 152
- HC-LP 152B
- HC-RP 103
- HC-RP 103B
- HC-RP 153
- HC-RP 153B
- HC-UP 152
- HC-UP 152B
Specifications
| Product Series | MELSERVO-J3 series | |
| Type | Servo amplifier universal interface three-phase 200 ~ 230 VAC | |
| Product no. | MR-J3-200A | |
| Main circuit power supply | Voltage class | AC200V |
| Voltage and frequency | 3-phase 200~230VAC 50/60Hz | |
| Permissible voltage fluctuations | 3-phase 170~253VAC | |
| Permissible frequency fluctuation | ± 0.5% | |
| Power supply control circuit | Voltage and frequency | 1- phase 200 ~ 230 VAC 50/60 Hz |
| Permissible voltage fluctuations | 1-phase 170-253 VAC | |
| Permissible frequency fluctuation | Within ± 5% | |
| Input (W) | 30 | |
| Directive interface | Generic interface | |
| Interface power supply | DC24V ±10 (have current capacity: 300 mA) 10% | |
| Regenerative resistor tolerance regenerative power (W) | Amplifier built-in resistor | 100 |
| When you use the standard accessories | − | |
| Control method | Sine-wave PWM control and current control method | |
| Dynamic brake | Built-in | |
| Protection feature | Overload current interruption, regeneration over voltage cut-off, overload cut-off (thermal electrons), servo motor overheating protection, detection instrument error protection, regenerative fault protection, low voltage and instantaneous power failure protection, over speed protection, error overload protection | |
| Position control mode | The maximum input pulse frequency | 1 Mpps (differential receiver at), 200 kpps (when open-collector) |
| Positioning feedback pulse | Per 1 rotation servo motor, encoder resolution: 262144 p/rev | |
| Command pulse ratio | Electronic gear A/B Times A=1~1048576, B=1~1048576 1/10 < A/B < 2000 | |
| Positioning completion. width | From 0 ~ ± 10,000 pulse (the pulse unit of the directive) | |
| Excessive errors | ± 3 rpm | |
| Torque limitation | Parameter settings or by external analog input （ DC 0 ~ + 10 V, the maximum torque ） | |
| Speed control mode | Speed control range | Analog speed command 1: 2000 and internal speed command 1: 5000 |
| Analog speed command input | DC 0 ~ ± 10 V, rated rotation speed (rotational speed in the 10 V can be changed by parameter No.PC12) | |
| Speed change rate | ± 0.01% or less (load variation from 0 to 100%), 0% （ power fluctuation ± 10% ）, ± 0.2% below （ ambient temperature 25 ° C ± 10 ° C ） only analog speed command | |
| Torque limitation | Parameter settings or by external analog input （ DC 0 ~ + 10 V, the maximum torque ） | |
| Torque control mode | Analog torque inputs | DC 0 ~ ±8 V, the maximum torque （ input impedance 10-12 k Ω ） |
| Speed limit | Parameter settings or by external analog input （ DC 0 to ± 10 V, rated speed ） | |
| Structure | Cold, open (IP00) | |
| Environment | Ambient temperature | 0 ~ 55 ° C (not freezing), save: -20 ~ 65 ° C (not freezing) |
| Ambient humidity | 90% RH (non-condensing that), storage: 90% RH (non-condensing that) | |
| Atmosphere | Not indoors not exposed to direct sunlight, corrosive gas, inflammable gas, oil mist and dust | |
| Elevation | Less than 1000 m above sea level | |
| Vibration | 5.9m/s2 below | |
| Weight (kg) | 2.1 | |
Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :
| Hubungi | : Sales & Marketing |
| Alamat |
: Simprug Plaza |
|
Jl. Simprug Raya Blok B.2 No.5 Cikarang Baru Jababeka II - Bekasi 17530 |
|
| Telepon |
: 021 2851 8058 | 021 2851 8059 | 021 3725 0521 | 021 4448 9918 |
| Mobile | : 0821 2570 0690 | 0858 9027 2127 | 0877 8228 6338 |
| Fax | : 021 2851 8058 |
| : sales@kitomaindonesia.com | marketing@kitomaindonesia.com | kitoma_kitoma@yahoo.co.id |
