Digital indicator Minebea CSD-401
Kitoma Indonesia - Menyediakan Digital indicator Minebea CSD-401 for digital load cell
Digital indicator for digital load cell. Compact size. Equipped with RS-232C as a standard.
FeatureMinebea CSD-401
- Up to 8 units of digital load cell are connectable.
- Compact size 96 mm x 48 mm.
- Equipped with RS-232C as a standard.
- Protection grade : IP65
SpecificationsMinebea CSD-401
| Bridge power supply | DC12 V±0.3 V within 280 mA |
|---|---|
| Applicable transducer | Up to 8 units of Minebea's digital load cells are connectable. |
| Input interface | RS-485 (2-wires method) |
| Baud rate | 56 700 bps |
| Termination | Externally *Terminating resistance must use 120 ohms. |
| Digital display range | - 99 999 ~ 99 999 (Changeable to x2, x5, x10, x20 or x50) |
| Display unit | 7 segment red LED with 14.2 mm character height. |
| Over display | '-OL' display at minus(-) over, and 'OL' display at plus(+) over |
| A/D value over display | '-OVF' display at minus(-) over, and 'OVF' display at plus(+) over. |
| Status display | STAB, TARE, GROSS, NET, ZERO, HOLD |
| Judgement display | SET1, SET2, SET3, SET4, SET5 |
| Display rate | 15 times/s (Changeable to 5 times/s.) |
| Display of decimal point | Changeable to no display, 101, 102, 103, 104. |
| External control function | ON/OFF, SET, TARE, NET/GROSS, ZERO, PRINT, NET display, HOLD display. |
| Comparator function | |
| Display range | -99 999 ~ 99 999 (0 ~ 99 999 for flow mode and discharge mode.) |
| No.of set points | 5 points of SET1, SET2, SET3, SET4 and SET5. |
| Set value of hysteresis data width | 0 ~ 99 digit |
| Hysteresis direction | Changeable to either 'On-delay' or 'Off-delay' |
| Comparator conversion rate | Changeable to 5 times/s or 15 times/s. (Synchronized with display rate.) |
| RS-232C interface | Baud rate : Selectable from 1 200 bps, 2 400 bps, 4 800 bps or 9 600 bps. Data bit length : Selectable from 7 bit or 8 bit. Parity bit : Selectable from none, even or odd. Stop bit : Selectable from 1 bit or 2 bit. Terminator : Selectable from CR + LF or CR. Communication method : Half duplex Synchronous method : Start-stop synchronous method Transmission data : ASCII code Cable length : Upto 15 m Signal name : TXD, RXD, COM.1 |
| Operating temp./humidity range | Temperature - 10 ℃ ~ 50 ℃ Humidity 85 % or less (Non condensing) |
| Power supply | AC100 V ~ AC240 V (AC85 V ~ AC264 V) 50/60 Hz |
| Power consumption | Approx. 13 VA (without any options at AC100 V ) Approx. 15 VA (with options at AC100 V) |
| Weight | Approx. 0.3 kg (without options) |
| Dimension (W x H x D) | 96 mm x 48 mm x 120 mm |
| Protection code | IP65 (Only for the fron panel when the attached panel mounting gascket is installed. |
Option
- Current output : CSD-401-07 (DC4 mA ~ 20 mA)
- Voltage output : CSD-401-25 (DC0 V ~ 10 V)
- BCD output : CSD-401-76
- RS-422/RS-485 interface : CSD-401-76
- Serial interface : CSD-401-77
*Please use a junction box model DB-307 for connecting with several digital load cells.
Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :
| Hubungi | : Sales & Marketing |
| Alamat |
: Simprug Plaza |
|
Jl. Simprug Raya Blok B.2 No.5 Cikarang Baru Jababeka II - Bekasi 17530 |
|
| Telepon |
: 021 2851 8058 | 021 2851 8059 | 021 3725 0521 | 021 4448 9918 |
| Mobile | : 0821 2570 0690 | 0858 9027 2127 | 0877 8228 6338 |
| Fax | : 021 2851 8058 |
| : scales@kitomaindonesia.com | kitomascale@gmail.com | timbangan@kitomaindonesia.com |
