AND AD-4328 Weighing Indicators
Kitoma Indonesa : AND AD-4328 Weighing Indicators
Basic Weighing Indicators & Simple Filling - Low Cost
The AD-4328 provides power and flexibility at an affordable price.
Performs a wide range of applications from batching to simple weighing.
It is reliable, accurate and easy to install.
Features
- Accumulative data is stored in memory automatically or manually
- Comparator output to optional relays (HI/OK/LO)
- Setpoint comparison for batching applications (Near Zero/Prelim/Target/Free Fall)
- Powered though AC adaptor or external DC (6 to 12V) power supply
- Optional bi-directional RS-232C, RS-422, RS-485 interface and BCD, relay, current loop outputs
- Front panel protected to IP-65
- Powers up to 6 load cell at 350?
- Grativity Compensation Function assures accurate weighing without the need for recalibration after transport
- Standard serial output for printers, external displays, etc.
- Averaging time and width can be selected for various applications
- Digitally span calibrated by entering a sensor output voltage through the keypad
- Mount on panel, column, stand or desk top
- Can be controlled by external input
- Enters predetermined tare weight from keypad
- RFI/EMI protected
- Meets or exceeds OIML Class III specifications
- An uncased version of AD-4328 is available (All options are applicable except OP-10 display stand)
- 1/10,000 display resolution
- Full Digital Calibration (FDC)
- Large (14.2mm high), bright red LED display digits
- Desktop or panel mount display placement (Optional column or wall mounting)
- Selectable units of measure:
- 1. International version: kg or t
- 2. U.S. version: lb or kg
- A/D conversion rate of approx. 10 times / second
- Easily selectable minimum divisions: 1, 2, 5, 10, 20, or 50
- RFI / EMI protection
- External control capability using up to 3 input signals:
- Select from Zero, Tare, Mode, Net / Gross, print or M+
- HI / GO / LO comparator function
- Weighing-in comparator function using 4 set points:
- Target, Freefall, Preliminary & near Zero
- Three relay outputs: Allows semi automated control by automatic activation of valves & gates and status lights & alarms
- Flexible power sourcing:
- 1. Nominal DC9V (DC6V to 12V)
- 2. AC adapter input jack or input terminal
Rear Panel View
- I/O terminal are screw type for easy maintenance
- AC/DC selectable
- When connected to both AC & DC, priority is given to AC
- Remote operation of front keys
Terminal Location
1. Option Installation
2. Load cell connection terminal
3. AC adaptor connector
4. DC input terminal
5. External front panel switch control
6. Standard serial output
| Specifications | |
| Input Sensitivity | 0.15µV/d (Min.) |
| Input Signal Range | - 1mV ~ 15mV |
| Load Cell excitation | 5 VDC ± 5% |
| Load Cell Drive Capacity | Up to 6 units of load cell at 350Ω. Up to 16 units of load cell (max. 90mA) |
| Zero Temperature Coeficient | ±0.2µV+0.0008% of dead load)/℃ (typ) |
| Span Temperature Coeficient | ± 8 ppm/℃ of reading (typ) |
| Non-linearity | 0.001% of full scale |
| Input Noise | ± 0.2µVp-p |
| Input impedance | 10MΩ ± or more |
| A/D Conversion method | Integrating dual-slope type |
| A/D Resolution | 40,000 counts (max.) |
| A/D Conversion Rate | 20,000 counts (maximum) |
| Weight Display | 6 digits, 14.2mm/0.56" (H) LED |
| Display Resolution | 10,000 counts (Max) |
| Minimum Division | Times X1, X2, X5, X10, X20, X50 |
| Maximum Display |
500000 |
| Under ZERO Indication | '-' minus display |
| Annuciation | ZERO, MD, GROSS, NET, PRESET TARE, kg/t or kg/lb |
| Keys | STANBAY/OPERATE, NET/GROSS, PRESET TARE, ZERO, M+, TARE, MODE, PRINT |
| Power | DC 9V (AC Adaptor or direct input to the terminal) |
| Net Weight | Approximately 0.8 kg/1.8 lb |
| Operating Temperature | -10℃ ~ 40℃ (14℉ ~ 104℉) |
| Storage Temperature | -10℃ ~ 70℃ (14℉ ~ 158℉) |
| Physical Dimensions | 170(W) x 126+19*(D) x 130(H) mm * include terminal cover |
| Panel Cut out Dimensions | 124 ± 0.5 x 162 ± 0.5 mm |
| Standard Accessories | Manual |
| Options |
|
| OP-01 | BCD Output (Open Collector) |
| OP-02 | Comparator Output (Open Collector) |
| OP-03 | RS-422/485 with Relay Output |
| OP-04 | RS-232C/Current Loop/Relay Output |
| OP-10 | Display Stand |
Untuk informasi lebih lanjut silakan hubungi bagian Marketing kami, kami senang untuk membantu :
| Hubungi | : Sales & Marketing |
| Alamat |
: Simprug Plaza |
|
Jl. Simprug Raya Blok B.2 No.5 Cikarang Baru Jababeka II - Bekasi 17530 Jawa Barat - Indonesia |
|
| Telepon |
: 021 2851 8059 |
| Mobile | : 0857 7664 0198 (Sales & Marketing) |
| Fax | : 021 2851 8058 |
| : sales@kitomaindonesia.com | marketing@kitomaindonesia.com | scales@kitomaindonesia.com | kitomascale@gmail.com |
